Kool Seal Gray Elastomeric Roof Coating, 4.75 gal
A 100% acrylic elastomeric base coat that delivers maximum adhesion across common roofing substrates. Designed to renew and protect roofs while preparing the surface for Kool Seal finish coats, this gray reflective coating applies by brush, roller, or spray and cleans up with soap and water.
Key Features:
- Maximum Adhesion: 100% acrylic elastomeric base coat bonds to metal, single-ply, BUR, modified bitumen, foam, concrete, EPDM, and Hypalon surfaces
- Versatile Application: Suitable for RVs and flat or metal roofs; not for asphalt shingles
- Easy Use & Cleanup: Apply with brush, roller, or spray; soap-and-water cleanup
- Durable Protection: Provides long-lasting base for finish coats; limited lifetime warranty
- Coverage & Recoat: Approx. 250 sq ft per pail; recoat after 24 hours, typically 2 coats
Specifications Table:
| Specification | Details |
| Manufacturer Color/Finish | Gray |
| Type | Elastomeric |
| Drying Time (Hours) | 24 |
| VOC Level | 50 |
| Actual Net Contents (Fluid Oz.) | 608 |
| Approximate Coverage (Sq. Feet) | 250 |
| Minimum Coats Required | 2 |
| Solvent Clean-Up Required | No |
| Container Size | 4.75-gallon |
| Brush On | No |
| Fibered | No |
| Flexible | Yes |
| Primer Required | No |
| Roll On | Yes |
| Spray On | Yes |
| Squeegee On | No |
| Waterproofing | No |
| CA Residents: Prop 65 Warning(s) | Yes |
| ENERGY STAR Certified | No |
| UL Fire Rated | No |
| Warranty | Limited lifetime |
| For Use with RVs | Yes |
| For Use with Asphalt Shingles | No |
| For Use with Metal Roofing | Yes |
| For Use with Wood Shakes | No |
| For Use with Flat Roofing | Yes |
| UNSPSC | 30151500 |
Frequently Asked Questions (FAQ):
Q: What surfaces can this coating be used on?
A: It adheres to metal, single ply, smooth BUR, modified bitumen, polyurethane foam, concrete, EPDM, Hypalon, and existing asphaltic/elastomeric coatings; do not use on roof shingles.
Q: How should I apply it?
A: Thoroughly mix and apply according to label directions using a brush, roller, or airless sprayer; two coats are recommended.
Q: How long before I can recoat?
A: Allow 24 hours between coats under normal drying conditions.
Q: Is a primer required?
A: Primer is not required for most surfaces, as this base coat is formulated for maximum adhesion.
Q: How do I clean up after application?
A: Clean tools and equipment with soap and water.
A Sleek, Modern Base That Revives the Roofline
This gray elastomeric base coat quietly elevates a buildings silhouette, laying down a refined, uniform surface that feels polished and contemporary. Its smooth, matte finish sets the stage for crisp reflective topcoats, turning utilitarian roofing into a cohesive design element. Pair it with streamlined metal accents and minimalist parapets for an architectural look that reads both durable and chic. Its an essential foundation for a luxurious, long-lasting roof system.
Prep and protect your roof with Kool Seals elastomeric base coat for a durable, high-adhesion foundationorder yours today.
