The Endura Patio Pacific SINGLE FLAP for THIN DOORS Pet Door is ideal for thin doors 1/2" up to 1-1/8" thick, compatible with various door types.

Airtight magnetic seal provides excellent insulation, withstanding winds up to 50 mph
Flap remains flexible in extreme temperatures from -40F to 110F.

Durable aluminum frame with customizable magnet strength for pet training and wind resistance.

Sturdy locking cover to block access when needed (inside frame only).

Benefits:

• Designed specifically for thin doors: Fits solid core doors, hollow core doors, metal doors, and storm doors 1/2" up to 1-1/8" thick
  
• Superior insulation: Airtight magnetic lining around the flap ensures maximum energy efficiency and weather resistance
  
• Resilient in extreme conditions: Flap withstands winds up to 50 mph and remains flexible in temperatures as low as -40F
  
• Durable and sleek: Sturdy aluminum frame with an attractive design that complements any home's aesthetic
  
• Accommodates pets of all sizes: Taller and narrower flap design caters to a range of pet sizes and needs
  
• Adjustable magnet strength: Customize the pet door's magnet strength for training purposes or to increase wind resistance
  
• Secure Locking Cover: Features a locking cover as strong as 16 gauge steel to block access when needed
  
• Easy installation: Installation in thin doors is made simple with the Endura Flap Single Flap Pet Door
  
• Made in the USA: High-quality construction and materials ensure long-lasting performance
  
• Suitable for various climates: Designed for four-season use, maintaining comfort and insulation in severe weather conditions
  
• Adaptable for pets' needs: Magnets can be removed or adjusted to better suit pets' preferences and abilities
  
• Highly praised by homeowners: Appreciated for its sleek design, durability, and superior insulation properties.

Product Specifications:

Parts:

• 1 Installation Template
  
• Short Screws (1")
  
• Medium Screws (1-1/4")
  
• Long Screws (1-1/2")
  
• 4 Screw Covers
  
• 1 Installation Magnet
  
• 1 Flap Frame
  
• 1 Trim Frame1 Tube of Silicone
  
• 1 Locking Cover

Tools:

• Pencil
  
• Drill with 3/8" (9,5 mm) drill bit
  
• Level
  
• Measuring Tape
  
• Jigsaw or Reciprocating Saw

Please Note: If the magnets seem too strong for your pet, you can remove some of them to better suit their needs. On some sizes

Watch the Installation Instructions:

Size Chart:

• Small; Single Flap: 6"w x 11"h
  
• Medium; Single Flap: 8"w x 15"h
  
• Large; Single Flap: 10"w x 19"h
  
• Extra Large; Single Flap: 12"w x 23"h
  
• XX Large; Single Flap: 14" w x 27" h

Flap Dimensions:

• Single Flap: 6"w x 11"h

The entry way your dog goes through.

Outside Frame Dimensions:

• 10 1/8"w x 16 3/4"h

The outer edge of the pet door.

1 - Single Flap:Flap on the inside of the wall (same side as locking cover).

Find The Best Pet Door Size For My Pet

A. Pet Height:inches

• Measure the height of your pet from the tallest point of your pet's back to the ground.

B. Pet Width:inches

• Measure the width of your pet from the widest part from shoulders to shoulder.

Single Flap Door Mount

Step 1Prep Your Door

• If you have not yet measured your pet, watchthis videoto ensure the pet door will work.
• If possible, remove the door from its hinges using a screwdriver and hammer to tap out the hinge pins. Lay the door flap for installation. Tape the provided template to the door. The top edge of the cut-out line should be at least 3 (7,6 cm) above the pet's shoulders.
• Be careful not to cut too close to the bottom of the door as you may reduce the door's strength. Level the top edge of the cut-out line.

Step 2Drill the Holes

• Once you are certain the pet door will work with your door, make sure the template is level, and mark the outline with a pencil. Remove the template and drill holes through the corners just inside of the lines using a (9,5 mm) drill bit.
• Make sure your drill is kept level and drills all the way through the door.

Step 3Saw An Opening

• Using a jigsaw, cut along the marked lines, making sure to cut straight.
• We recommend applying masking tape along the outside of the lines to protect your door from scratch marks as you cut with the jigsaw.

Step 4Check Weatherstripping

• Ensure the weatherstripping is firmly pressed in the groove on both frames. Weatherstripping indicated in red.

Step 5Position the Frames

• Place the trim frame on the outside of the door and the flap frame on the inside.

Step 6Position Screws

• Select appropriate screws and insert them into the pet door from the inside.
• Do not fully tighten screws until all four screws are inserted and the pet door is leveled.
• Use the included installation magnet to help align the screws.

Step 7Screw Door Into Place

• Once the pet door is leveled, tighten the screws so that the weatherstripping compresses.
• Do not overtighten.

Step 8Attach Screw Covers

• Push the four screw covers in by hand to cover the screws.

Step 9Seal With Silicone

• Apply silicone where the two frames meet. Also apply silicone where the outside frame meets the door.